Testimonials from Our Customers
(Full names & email addresses have been removed)

Wednesday, May 19, 2010 10:47 AM

This device worked perfectly. I was able to resurrect 2 ATMega32 chips. So the fuse repairer has just about paid for itself.
Thanks heaps,

Friday, May 7, 2010 6:08 PM

I bought Fusefix V1.1 and received in 05/maio/2010…
Thanks for sending correct!
Yesterday, I made the first test and it worked well (1 recovered mega32, 1 mega8, 1 mega88 and 1 attiny2313)
Already, thanks for listening,

Sunday, May 2, 2010 3:49 PM

I was really suprised how fast the delivery was. Device arrived to my mailbox on friday 30.4. and in perfect condition. Getting con"fused" with AVR is so easy, now restoring frozen controllers is even easier. Many thanks for this beautifully built chip-saver.


Wednesday, April 21, 2010 8:36 PM

I received the AVR Fuse Repair Programmer today and I'm very satisfied with it. 
I disabled the reset pin on an ATmega168 and  I was able to restore the fuse bits to their factory settings with the programmer.
Thank you very much for the excellent product and fast shipping.

Monday, February 8, 2010 9:50 PM

The programmer arrived safely today, and is absolutely great!
Thankyou for your very fast despatch and excellent product.
As a 'newbie' to the world of AVRs, I'm sure it will be very handy 
if I manage to mix up the 'fuses' again.

Best regards,

Friday, January 22, 2010 11:34 PM

Today I received my FuseFix for Atmega AVRs. Thank you very much for your
very fast shipping (1 week from canada to germany). The FuseFix works
perfect for me. I could repair five of seven Atmega8-16PU. The left two
Atmega8 may be damaged. So I saved at least five processors which would cost
nearly the same as your FuseFix, so it's already paid by only one usage.

Thank you very much. You did a great work with this device. I'm glad to have
Kind regards,

Friday, November 6, 2009 8:48 AM

WOW, I have already receive the programmers, and they work like a charm. I have now fixed all my AVR’s, and the programmers, have already paid for themselves ;-)
Thanks and best regards from Christian

Fr: Micro Controller
Send: 6. november 2009 12:49

How is that possible? How many days did it take to get the programmer? 
I think this is the fastest one yet.

I made the order on the 2nd, and you shipped out the same day, so it has only taken 4 days :-D
Best regards from Christian

Tuesday, November 3, 2009 4:48 PM

I just got your package in the mail and wanted to let you know 
that it works great and I am really happy with it. I just gave you guys some 
nice feedback on ebay. Did you design this product?

Thanks Adam.
Lots of guys are using this programmer every day. I myself used it the other day. 
I was simply trying to program an atmega16 when it locked up on me. I cannot explain why 
this happened because I use the best programmer (genuine atmel avrisp2, not a clone).

Yes, I did design the board. I thought a tool like this would be handy to have around.
After seeing many posts on various chat forums titled "help, I locked my avr", I decided 
to try and sell the boards. So far we have sold over 100 boards.
I hope the device is as useful to you as it is to me!
All The Best

Thursday, October 22, 2009 10:48 PM
Thank you, 
I got the unit today and it worked great to reset the fuses on all my atmega8515L chips.  You have made a quality product. 
Best regards, Steve

Tuesday, October 20, 2009 7:45 PM

in date Monday 19 october the programmer in arrived at my home
Today 20 october I have tested it...great it work well!
many thanks, Best Regard, Giovanni 
Keep me informed about your new products.

Thank you for letting me know. I hope you can make good use of this programmer.
Kind Regards,

Wednesday, October 14, 2009, 7:16 AM

I’ve received my programmer last week on Friday! It works good,
I have tested it with 3 Atmega8 and recovered them succefully.
Nice job man! Regards,Jamal 

Thursday, October 8, 2009 1:06 PM
I received the boards yesterday, very prompt delivery. I just had a quick questions
as I'm somewhat of a noob when it comes to hardware. I've read your doc, but wanted to confirm with you that a 15V DC supply would be fine? It just feels high as I've been playing around with 3.3V since I started, admittedly only a few weeks ago.

On Thu, Oct 8, 2009 at 1:37 PM, Micro Controller wrote:

Yes 15 VDC is enough. Because the programmer needs to put the avr in parallel programming mode,
12 VDC is needed at the reset pin. In order to achieve this, you must have at least 13.5 VDC 
power supply before the regulator (at the input). The adapter must be centre positive. 
(if in doubt, check it with a meter) Please let me know if you have any questions.

Wednesday, September 30, 2009 5:49 AM
Just tried the Fuse Reset on an Atmega128 ET-Stamp. Works fine!
I have attached a few Pic's of my setup. A little ruff and ready
but works well. Thanks for all your help. Kind regards, Geoff.

Friday, September 25, 2009 11:49 AM

I appreciate your understanding. Thank you for your such express service.
I have received your Micro-progger today. 
Goods received in good order. Regards, Peter

Fwd: ATTiny Fuse Restore
Saturday, September 12, 2009 9:47 PM

The package came in today, "air mail"-shipped on 8/25/2009!
Thanks for your help, Bill

Wednesday, July 8, 2009 1:21 PM

The board arrived here fast and in perfect conditions. Congratulations,
the board is very well designed and manufactured. 

The microcontrollerprog.com site informs that the board has a instructions manual, 
but I did not receive any. Do you have the instructions in an eletronic format? 
I'm asking you about the instructions because I'm trying to use the board and 
It is not working, problably because I'm doing something wrong. I have a 
configurable power supply (from Minipa) and I'm applying a voltage of 13.5 VDC 
with a current of 2 amperes. Also, I have tested with 2 microcontrollers: attiny26 
and attiny261. After I have restored the fuse bits with the board it was not possible 
to read the fuse bits using the PonyProg software.

We need very much to use your board, we have about 25 attiny26 to recover. Besides that, we are working in a new project that we have to use the reset pin and we will need so much to use your board :-)
Could you help? Best regards, Karina

On Wed, July 8, 2009 at 1:37 PM, Micro Controller wrote:
Hello Karina, Check the email I sent, the link to download the information is there. Please let me know if you have any questions.

Friday, May 29, 2009 4:00 PM

I got the information and the board came today!!!!
Fixed my chips in a flash Thanks, Nice product
Why they make the fuse settings so difficult I don't know.

Ebay Feedback
06-Nov-09 06:40 

ATMEL AVR ATMEGA ATTINY Fuse Repair Programmer
Perfect matérial / Prompt expedition / Super ebayor / Recommanded....

Ebay Feedback
02-Nov-09 20:57

ATMEL AVR ATMEGA ATTINY Fuse Repair Programmer
Good product, very fast shipment!

Ebay Feedback
02-Nov-09 07:55
ATMEL AVR ATMEGA ATTINY Fuse Repair Programmer
Thanks !!! . . . . . . . . AAA+++++++++++++++++++++++++++

Ebay Feedback
29-Oct-09 08:48
ATMEL AVR ATMEGA ATTINY Fuse Repair Programmer
Great product, fast shipping, recommended.

Ebay Feedback
25-Oct-09 05:41
ATMEL AVR ATMEGA ATTINY Fuse Repair Programmer
Excellent product;Great service; Prompt shipping, Will gladly do business.

Ebay Feedback
24-Sep-09 03:39
ATMEL AVR ATMEGA ATTINY Fuse Repair Programmer
very good very fast service thank you

Ebay Feedback
13-Sep-09 19:35
ATMEL AVR ATMEGA ATTINY Fuse Repair Programmer
Responsible seller who treat customers well.

Ebay Feedback
15-Aug-09 01:12
ATMEL AVR ATMEGA ATTINY Fuse Repair Programmer
Item exactly as Described!! HIGHEST RECOMMENDATION!!! AAA++++++++++++++++++++

Ebay Feedback
08-Aug-09 08:34
8051 Standalone Programmer
Good communications item as advertize.

© 2018 microcontrollerprog.com