AVR Chip Copier
The AVR Chip Copier will copy any avr in the device list below, without the use of a computer** including fuses and lock bits. *** Simple to operate with only one jumper setting. When Jumper J1 is removed, AVR Chip Copier is in read mode. When J1 is installed, the AVR Chip Copier is in write mode.
view a short video demonstration here
**A computer is required to configure the programmer options. A USBtoTTL or an RS232toTTL conversion board will also be needed.**
***If the lock bits have been programmed, the AVR Chip Copier will not be able to read the contents.***
Order the AVR Chip Copier
Download the Instructions here.
Device List for AVR Chip Copier
The following devices are supported by this programmer:
*** Limited to 32K including eeprom file
Back to homepage
© 2016 microcontrollerprog.com